The Commercial Electric 35 in. Solar Motion Utility LED Shop Light comes fully assembled and provides added brightness to any workshop, outdoor patio or garage. Solar-powered for easy wireless installation. Comes equipped with a 20 ft. cord between the solar panel and the light fixture, an ultra-light weight design is perfect for hanging or flush mount installations to suit your space. The LED utility light is wet or dry location rated so it has the versatility to be used indoors or outdoors. This Integrated LED light is equipped with a motion detector sensor that can operate at up to a 10 ft. mounting height. The fixture provides up to 6-hours of motion-activated 4000K Cool White light, after the motion is detected, the fixture will illuminate at 1500 Lumens for 2-minutes, then drop to 750 Lumens after 2-minutes if motion remains detected and then 350 Lumens after 4-minutes if motion continues to be detected. With no wiring needed, these lights install in minutes and the integrated LED means maintenance free operation for years, ideal for remote areas or places without power, such as sheds, garages or covered patios. It runs entirely on solar energy that is stored in rechargeable batteries with the light activated by motion. Choose this luminous general-purpose solar task lighting fixture for residential or commercial applications.
- Solar powered and easy to install
- No main power or wiring required making this shop light maintenance free
- Up to 1500 Lumens
- Automatic dusk-to-dawn operation
- Shop light will illuminate when in the dark and motion is detected the solar shop light will continue illumination if motion is continuous
- Light brightness is determined by the charge level of the batteries light brightness will decrease during operation to extend battery life
- Up to 6-hours of illumination at full battery charge
- 8.5 in. x 10 in. solar panel with 20 ft. lead cord can be mounted either with included wall mount bracket or with included stake
- Includes replaceable lithium batteries (3 x 18650-2000 mAH)
- Before using the solar shop light, charge the batteries to full capacity after placing solar panel at a full and direct sunlight location, this initial charge should be done with the shop light connected and in the off position, the batteries will reach full charge after two full days of sunlight

























Reviews
There are no reviews yet.